- interior and exterior
including all equipment and surfaces. Wash and
Deodorize - Mixed directly in spray tank or inject
through your pressure washer. Wash ceilings and
walls using 1 gallon of Cyclone per 10,000 sq. ft.
of floor area. This usually correlates to 1 gallon
per 300 – 500 gallons of water. Depending on time
allowed for clean out Cyclone is safe to dry on all
surfaces. For best results rinse all surfaces using
1 to 2 quarts of Cyclone in your rinse water.
Applications for Cyclone
- Breeder facility
- Processing plants
- Trailer wash out
- All confinement areas
equipment and surfaces - Cyclone is
safe to use for all of your cleaning needs.
Recommendations for use
As all operations are different and dilution rates may
vary based on surface conditions and objectives. We
recommend removing as much excess buildup as
possible using an air compressor or broom prior to
Handling and Storage
Use only as intended. Though this product is
non-toxic and non-hazardous. The manufacturer
assumes no liability, expressed or implied, in the
use of this product.
Store this product out of direct sunlight in a cool
dry area. For best results, use within 24 months.
Request a Cyclone SDS for more specific
information. Made in the USA.
Eye contact: Immediately
flush eyes with plenty of water for at least 15 minutes.
Seek medical attention if irritation persists.